Which air quality standards apply in the Philippines?

Ambient guideline values and emission standards for stationary sources are set under the Philippine Clean Air Act (RA 8749) and its Implementing Rules and Regulations (DAO 2000-81), together with subsequent DENR issuances.

Who can conduct stack emission testing?

Source emission testing to demonstrate compliance must be conducted by third-party firms accredited by DENR under DAO 2013-26, with samples analyzed by EMB-recognized laboratories. EnviSynergy plans and coordinates this testing and evaluates the results.

How often is air quality monitoring required?

Frequency depends on the ECC conditions, permit conditions, and the type of source. Monitoring results are reported through the Self-Monitoring Report and, for ECC holders, the Compliance Monitoring Report.

Is air quality monitoring part of an EIA?

Yes. EIA baseline studies characterize existing ambient air quality and noise levels, and the Environmental Monitoring Plan sets the monitoring that continues after ECC issuance.

Philippine Clean Air Act Compliance

Air Quality Monitoring in the Philippines

EnviSynergy designs and manages ambient air, source emission, and noise monitoring programs that meet ECC conditions and the requirements of the Philippine Clean Air Act of 1999 (RA 8749).

Request a Consultation

Why Air Quality Monitoring Matters

Air quality monitoring is required at several points in a project's life. EIA baseline studies establish existing ambient conditions before construction. ECC conditions often require periodic ambient and noise monitoring during construction and operation. Establishments with air pollution source installations must demonstrate compliance with the emission standards in the Implementing Rules and Regulations of RA 8749 (DAO 2000-81) and report results through their Self-Monitoring Reports.

EnviSynergy plans each program around the applicable regulatory requirement, selects monitoring stations and parameters, and coordinates sampling and analysis with DENR-accredited source emission testing firms and EMB-recognized laboratories. Results are interpreted against the applicable standards and prepared for submission.

Air Monitoring Services

Ambient Air Quality Monitoring

Monitoring of criteria pollutants at project boundaries and sensitive receptors for EIA baselines and ECC compliance.

Particulate matter (TSP, PM10, PM2.5)
Gaseous pollutants such as SO2 and NO2, as required
Station siting and sampling schedules
Comparison against National Ambient Air Quality Guideline Values

Source Emission Testing Coordination

Planning and coordination of stack testing for boilers, generator sets, furnaces, and other stationary sources.

Testing by DENR-accredited third-party firms under DAO 2013-26
Parameter selection based on source type
Evaluation against emission standards for stationary sources

Noise Level Monitoring

Daytime and nighttime noise measurements at site boundaries and nearby communities.

Baseline and compliance monitoring
Construction and operational noise assessment
Mitigation recommendations

Air Dispersion Modeling for EIA

Prediction of ground-level pollutant concentrations from proposed sources to support impact assessment.

Emission inventory development
Sensitive receptor analysis
Input to the Environmental Management Plan

Self-Monitoring Report (SMR) Air Module

Preparation of the air quality section of the Self-Monitoring Report required under DAO 2003-27.

Air pollution source equipment inventory
Operating hours and control facility records
Emission test results

Monitoring Data Management

Consolidation of monitoring results across periods and sites for trend analysis and reporting to regulators, lenders, and management.

Trend and exceedance analysis
ECC Compliance Monitoring Report inputs
Lender and ESG reporting

Legal Basis

Issuance	Relevance
RA 8749	Philippine Clean Air Act of 1999.
DAO 2000-81	Implementing Rules and Regulations of RA 8749, including ambient guideline values and emission standards for stationary sources.
DAO 2013-26	Revised guidelines for DENR accreditation of third-party source emission testing firms.
DAO 2003-27	Preparation and submission of the Self-Monitoring Report (SMR).
PD 1586 and DAO 2003-30	ECC conditions that set project-specific monitoring requirements.

Full texts and recent issuances are available in the DENR Policies database.

How We Deliver a Monitoring Program

1
Requirement Review
ECC conditions, permit conditions, and applicable standards are reviewed to define what must be monitored and how often.
2
Program Design
Stations, parameters, methods, and schedules are set and documented in a monitoring plan.
3
Sampling and Analysis
Fieldwork is carried out with accredited testing firms and EMB-recognized laboratories.
4
Evaluation
Results are compared against the applicable standards and prior periods, and exceedances are flagged with likely causes.
5
Reporting
Findings are prepared for the SMR, the ECC Compliance Monitoring Report, or the EIA document, as applicable.

Frequently Asked Questions

Related Guides

Related Services

Plan Your Air Quality Monitoring Program

EnviSynergy Corporation is a DENR-EMB registered EIS preparer (CFCO-0045) serving project proponents and establishments across the Philippines.